Description

Skystars F7HD Pro4 Flight Controller & 55a BlheliS 3-6S ESC – FlyStack 30×30

Not sure what FC, ESC, or AIO to get?

View our FC & ESC comparison

F7HD Pro4 Flight Controller Specifications:

MCU: STM32F722RGT6 216MHz
Gyroscope: BMI270
Baro: Bmp280
OSD: Betaflight SPI OSD DJI HD OSD(UART6)
Black box: 16MB
6x Uarts: UART 1/2/3/4/5/6
4x PWM outputs
1x I2C
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
USB Type-C(USB2.0)
1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
VTX 10V/Vbat filtered power ON/OFF switch
DJI FPV OSD is supported by any spare UART
LED: 4 LED independent pads, support WS2812 programming led output.
Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can be installed on any spare UART.

Power:

Input voltage: 3-6S
BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
LDO 3.3V: Max.250mA

FC Firmware:

BetaFlight firmware: SKYSTARSF722Pro
INAV firmware:SKYSTARSF722HD

Mounting:

Installation size: 30.5mm × 30.5mm The installation hole is M4 and includes silicone softmounting gromet
External size 39mm × 39mm
Flight control weight: 6.9g
Flight control onboard voltage sensor.

KO55A 3-6S BLHeli_S Dshot600 4-in-1 ESC

Dimension: 41*46mm
Mounting Holes: 30.5*30.5mm/Φ3mm and includes silicone softmounting gromet
Weight:13.3g
Supports 3-6S Lipo input
BB21 MCU, 48Mhz Runs BLHELI_S 16.X Firmware
Current sensor: YES
BEC: NO
Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
Target: Q-H-30 BLS

esc-configurator.com

Package Includes:

1x F7HD Pro4 Flight Controller

1x KO55A 3-6S BLHeli_S Dshot600 4-in-1 ESC